Taurus Cup Wrap - 3

SIZING: I print cup wraps no more than 9.5 inches wide OR 4.5 inches tall. Whichever comes first. This allows for a little wiggle room on your 16oz glass cups. 

Printed with UV Ink Technology, allowing the ability to print a white layer of ink under the color layer on clear adhesive vinyl, so it will show on ANY color background

How to Apply:
1. Use a squeegee on front and back before use.
2. Trim down wrap to remove excess material to your preference.
3. Make sure surface is clean from any hand oils.(DO NOT use alcohol to clean.)
4. Peel design film transfer off.
5. Line the design film on surface and lay design film down.(The adhesive is extremely strong. Once the film touches the surface it’s impossible to take off.)
6. Squeegee the film down, working from the center outwards, pushing out any bubbles.
7. Rub, Rub, Rub. The more rubbing the better.
8. Carefully and slowly peel clear film off and done!

Care Instructions:
We ONLY recommend hand washing. Do not soak in water/alcohol. Do not wipe with harsh chemicals. We DO NOT recommend dishwasher or microwave